Rc-Modelshop

MX-10

149.95 *Prijzen zijn inclusief btw
With 5 control functions, the mx-10 HoTT enables advanced RC model builders to control numerous models. The use of Graupner HoTT 2.4-GHz transmission technology ensures high functional reliability through bidirectional communication between transmitter and receiver, with telemetry displayed via the optional Smart-Box and ultra-fast response times.
  • Programming with switches
  • Dual rate switch 70 % / 100 %
  • Wireless teacher/pupil mode
  • Wireless simulator operation via the SUM signal of the receiver
  • Mixer for rudder or delta-wing or V-tailplane in the transmitter
  • Additional mixers possible via the receiver
  • Servo reverse function
  • Mode 1-4 programmable
  • 3-pole serial connection for USB adapter #7168.6 for firmware upgrades and for display of telemetry data with the Smart-Box #33700
  • Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
  • Bidirectional communication between transmitter and receiver
  • Wireless L/S function
  • Servo cycle times of 10ms can be selected for digital servos (with Smart-Box)
  • Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor
  • Short aerial, foldable
  • 5 control functions
  • Modes 1 to 4 are freely selectable
  • Programmable failsafe function »Stop« or »Advance to preset positions«
  • Charger socket for chargeable transmitter battery
  • Integrated V-mixer, delta-mixer, or rudder mixer selectable, makes it possible, for example through skilful combination of control functions to accomplish finely dosed and realistic turning manoeuvres, such as for track vehicles, duo-boat drives, and V-tailplanes on aircraft models
  • Servo-reverse switch for simple adaptation of turning direction for all control channels
The set includes:
Microcomputer telemetry transmitter Graupner HoTT mx-10 with built-in rechargeable 1500 mAh NiMH transmitter battery, Graupner HoTT GR-12 receiver, 200 mA transmitter charger
General HoTT features:
  • Simple, extremely fast binding
  • Range test and warning function
  • Low-voltage warning
  • Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
  • Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with the HoTT-Smartbox
  • Binding of any number of receivers for channel expansion (max. of 32 channels)
  • Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
  • Maximum immunity to interference through optimised frequency hopping and broad channel spread
  • Intelligent data transmission with correction function
  • Extremely fast rebinding, even at max. distance
  • Telemetry analysis in real time
  • Over 200 systems can be used simultaneously
  • Future-proof through update capability via USB interface
NEW:
  • Extremely long range
  • SUM signal programmable at the output of the highest channel for L/S, simulators, V-stabilisers, et cetera
  • Simultaneous output of server outputs possible in blocks of 4
  • Adjustable sensitivity and speed of the vario-sensors
  • Faster response times (10ms periods adjustable)
  • No additional delays due to module processors. The entire hopping management is done directly from the main processor
  • USB connection possible
  • Wireless teacher / pupil function
Specification
Dimensions (LxWxH)
190 x 175 x 115
mm
Operating voltage
3,4 ... 4.8
V
Frequency
2400 ... 2484,5
MHz
All-up weight, approx.
630
g
Range approx.
4000
m
Charging rate
125
mA
Temperature range
-15 ... 55
°C
Aerial length
120
mm